+86 (0)571 85888707
You Are Here:Home >> Solution >> Plastic Industry
Plastic Industry

Plastic Colorimeter to Measure Injection Plastic (PP) Color

Plastic Industry | 2017-08-14 15:39:34

Plastic parts are matched with the plastic molding machine, and they provide complete configuration to the plastic products and for precise size. With the rapid development of the plastic industry and quality improve, the usage of the plastic parts are getting more and more widely. And the demand for plastic products is increasing at the same time.

Now we introduce how to measure the plastic parts color difference with our plastic colorimeter CS-200.
The First Step: Prepare the samples.
The Second Step: Turn on the plastic colorimeter CS-200 and then calibrate it. Press button “Cancel” to enter into the measure interface. Put the target under the device and then press “test”, after 2 seconds, we will see the testing result.

The Third Step: After we finish the test, choose “call-in the sample” and then press “Enter” to get into the “sample testing” interface. At last press the button “test” to measure the sample 2 and sample 3, we will get the color difference between the three samples.

Testing Result for sample 2         Testing Result for sample 3

When finish the test, the color difference value between the three samples could be seen directly on the instrument screen. Plastic colorimeter has been widely used to measure the opaque plastic such as plastic sheet, printed plastic film,etc. Any inquiry, you are welcome to contact us.

Spectrophotometer for YI Measurement of Transparent Plastic Sheet