Part 1 Instrument introduction
1 .15°, 45°, 110° three-angle measurement of color data, flicker and particle grade
2. Built-in automatic white calibration without human intervention
3. Simulate direct sunlight and slow-light illumination, using high-resolution CMOS sensors to measure and control flicker and particle levels
4. Adopt stable and long-life LED light source, which can be used for up to 10 years.
5. Rubber pad prevents the instrument from sliding when reading
6. With LCD display, real-time viewing of measurement results
7. All-metal body with good texture and shielding characteristics
8. Industrial grade communication cable meter power supply cable, can be bent more than 10W times
Provide reflectivity measurement and analysis software to meet the user's analysis and management traceability of test data; provide industry-wide test report to facilitate data communication between users.
Software interface diagram
Part 2 More Instrument Pictures
Front
Side
Installation
Instrument Parameters
Model |
CRX-52 |
Measurement Condition |
45°illumination 15°、45°、110°observation |
Light Source |
CLEDs |
Sensor |
Silicon Photodiode |
Non-Contact Measurement Distance |
Contact Measurement |
Calibration Method |
Built-in Calibration |
Wavelength Range |
400nm-700nm |
Half Band Width |
5nm |
Wavelength Pitch |
10nm |
Measuring Caliber |
φ7mm |
Measuring Time |
6s |
Intervals |
1s |
Reflectance Range |
R(0%-200%) |
Resolution |
0.0001 |
Measurement Parameter |
CIE-L*a*b,L*C*h,Scintillation index, Surface particle grade |
Observer |
10°/2° |
Illuminants |
A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,CWF,U30.DLF,NBF,TL83,TL84.U35 |
Color Difference Formula |
ΔE*ab,ΔEc,ΔEp, |
Repeatability (Standard White tile) |
Chromaticity value: ΔE*ab standard deviation ≤ 0.03, maximum value ≤ 0.05. (After calibration, the whiteboard is continuously tested 30 times, and the measurement interval is 1 s) |
Inter-Instrument Agreement |
Within ΔE*ab 0.5 (average of BCRA Series II 12 swatches) |
Light Source Life |
Lifetime Warranty |
Working Temperature |
0°C-45°C, Relative humidity 80% or lower (at 35°C), no condensation |
Storage Temperature |
-25°C-55°C, Relative humidity 80% or lower (at 35°C), no condensation |
Communication |
Industrial USB, other interfaces can be customized |
Power |
+12DCV |
Weight |
1.7kg |
Size |
L180mm*W107mm*H118mm |
Online measurement
Overview - Automotive paint online color measurement system only uses the probe part of the non-contact measuring instrument, and the probe part is placed on the robot, production line and other devices, which can realize continuous measurement all the time, monitor the change of sample color information, and let the management personnel know in real time. The quality of the product is corrected in a timely manner, and the production data is recorded to meet the traceability requirements of production management.
Online color measurement probe
Car - The measurement of the color of the car's exterior, placing the measuring probe on the robot and moving it to the specified position for color measurement.
Automotive interior appearance measurement schematic
Technical Support
1. One year warranty.