Color spectrophotometer CS-801 adopts geometric of D/8 which is highly recommend by CIE, integration of the full band LED composite light source, double beam optical system, ETC every-test calibration technology, spectral reflectance standard deviation within 0.08, maximum of chromaticity values ΔE*ab is 0.03.
Brief Introduction
1. Its test aperture is in the sideward which makes it more convenient to fix the sample. Solid samples (plastic sheet, cloth) can be placed directly on the test aperture. Paste objects can be placed in a glass cell/cuvette,and then placed in the measurement port. It is very suitable for powder material measurement in case of material falling into the integrating sphere.
2. D\8 Geometry
It adopts internationally agreed geometry D/8 (Diffused illumination, 8 degrees observer) and SCI(specular component included)/SCE(specular component excluded).
3. Can Measure SCI and SCE at the same time
4. ETC Technology (Every Test Calibration)
5.Free Color QC Software
6.More Instrument Examples
a. One Years Guarantee.
b. If testing result is not correct, we will refund to you.
c. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.
Type |
CS-801 |
|
Geometry |
d/8(Diffused lighting, 8 degrees observe angle)(conform to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c standards) |
|
Size of integrating sphere |
Φ40mm |
|
Illumination Light source |
CLEDs(entire wavelength balanced LED light source) |
|
Sensor |
dual light path sensor array |
|
Wavelength range |
400-700nm |
|
Wavelength interval |
10nm |
|
Half spectral width |
5nm |
|
Reflectivity range |
0-200% |
|
Reflectivity resolution |
0.01% |
|
Observation angle |
2°/10° |
|
Measurement light source |
A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84, NBF,U30,CWF |
|
Data being displayed |
sample's color values, reflectance, color difference values/graph, pass/fail results, color error tendency, color simulation, display measurement area, bhistory data color simulation, manual input standard sample, generate measurement report |
|
Measurement time |
About 1 second |
|
Measurement time interval |
0.5 second |
|
Measuring caliber |
Φ11mm |
|
Color space |
CIE-L*a*b,L*C*h,L*u*v, XYZ, Yxy, reflectance, Hunterlab, Munsell MI, CMYK,RGB,HSB |
|
Color difference formulas |
ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00,ΔEab(Hunter),555color classification |
|
Other colorimetric indices |
WI(ASTM E313-00,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger Stensby), YI(ASTM D1925,ASTM E313-00,ASTM E313-73), Tint(ASTM E313,CIE,Ganz),metamerism index Milm, adhesive/changing color fastness, ISO luminance,8 gloss, A density, T density, E density, M density |
|
Repeatability |
light splitting reflectivity: standard deviation within 0.08% |
|
Chromaticity values: ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals),Maximum:0.03 |
|
|
Battery capacity |
rechargeable, 20000 continuous tests, 7.4V/6000mAh |
|
Interface |
USB |
|
Data storage |
40000 test results |
|
Light source longevity |
5 years, 1.5 million tests |
|
Inter-instrument agreement |
ΔE*ab within 0.2(BCRA color charts II, average of the 12 charts) |
|
Size |
350*300*200mm(L*W*H) |
|
Weight |
4.5kg |
|
Display |
5 inches True color screen |
|
Work temperature range |
0~45℃, relative humidity 80% or below(at 35°C), no condensation |
|
Storage temperature range |
-25℃ to 55℃, relative humidity 80% or below( at 35°C), no condensation |
|
Standard accessories |
AC power line, operating manual, color management software, drive software, electronic operating manual, color management guide, USB cable, black/white calibration tube, measurement and test report |
|
Optional accessories |
powder molding device,40*10 cuvette |
|
Color matching system |
Matches |
|
UV light source |
without |
|
Benchtop Spectrophotometer CS-801 Application Examples
Fabric Color Measurement
Opaque Liquid Color Measurement