+86 (0)571 85888707
You Are Here:Home >> Products >> Bench top Spectrophotometer
Bench top Spectrophotometer
Product

CS-810 Transmittance Spectrophotometer

CS-810 transmittance spectrophotometer is good performance and specially designed for testing the transparent material's transmittance, APHA/Pt-Co/Hazen, Gardner, ASTM color, chromatic value,etc.

Transmittance spectrophotometer CS-810 adopts the geometry of D/0, integration of the full band LED composite light source, double beam optical system, ETC every-test calibration technology, which makes the instrument reaches a resolution of 0.0001, deviation of the transmittance within 0.08% and chromatic value △E*ab 0.015.


Brief Introduction

1. D\0 Geometry

liquid color control


2. It is suitable for testing the clear, transparent and translucent products such as glass,oil,plastic,petrol,gasoline and other materials' color.

liquid color control


3. Adopt UV enhanced silicon photo diode Extend the transmittance from 0~100% to 0~200%

liquid color control


4. It can also be used for measure APHA/Hazen/Pt-Co, Gardner, ASTM color, Yellowness Index for liquid.

liquid color control


5.Color QC Software

Our spectrophotometer comes with PC color QC software, which is applicable in various industries for management of color data. It is used for store test result,generate test report and print test report after connect with printer.

liquid color control


6.Longest Warranty Time

liquid color control


a. One Year Guarantee Time.

b. If testing data is not correct, we can do refund.

c. We will provide testing report for every device to assure the authority of the data and it will save the calibration cost for 1 year.

Type

CS-810

Illumination

d/0(Diffused illumination, 0°viewing)
SCS optical engine(light splitting and integration system),( conform to CIE No.15, ISO 7724/1, ASTM E1164,DIN 5033 Teil7, JIS Z8722 Condition c standards)

Size of integrating sphere

Φ40mm,Alvan diffused reflection surface coating

Illumination Light source

CLEDs(entire wavelength balanced LED light source)

Sensor

dual light path sensor array

Wavelength range

400-700nm

Wavelength interval

10nm

Half spectral width

5nm

Reflectivity range

0-200%

Reflectivity resolution

0.01%

Observation angle

2°/10°

Measurement light source

A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12

CWF,U30,DLF,NBF,TL83,TL84

Data being displayed

Transmittance graph/value, chromatic value, color difference values, color assessment results, color tendency, history color value simulation, manual input standard sample, generate measurement reports

Measurement time interval

2 seconds

Measurement time

0.5 seconds

Color space

CIE-L*a*b,L*C*h,CIE-L*u*v, XYZ, Yxy, Transmittance, Hunterlab, Munsell MI, CMYK

Color difference formulas

ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00

ΔEab(Hunter),555color classification

Other colorimetric indices

WI(ASTM E313-10,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Ganz, Stensby),

YI(ASTM D1925ASTM E313-00,ASTM E313-73),

Tint(ASTM E313-00,CIE,Ganz),Metamerism index Milm, Stick color fastness, Color fastness, APHA, Pt-Co, Gardner, Saybolt, Astm color

Repeatability

light splitting reflectivity: standard deviation within 0.08%

color values:ΔE*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals,Maximum0.03)

Interface

USB

Data storage

mass storage

Light source longevity

5 years, 1.5 million tests

Size

475*340*150mm(L*W*H)

Weight

about 7kg

Work temperature range

0~45, relative humidity 80% or below at 35°C ),no condensation

Storage temperature range

25 to 55relative humidity 80% or belowat 35°C ), no condensation

Standard accessories

AC power line, color management software, drive software, USB cable, black calibration tube, 40*10mm cuvette