+86 (0)571 85888707
You Are Here:Home >> Products >> Colorimeter
Colorimeter
Product

CS-10 Colorimeter

Colorimeter is widely used in different industries such as plastic, printing, paint, textile, dyeing, etc. It measures the sample color value of L*a*b*, L*c*h*, color difference ΔE and ΔLab according to CIE color space.

Colorimeter is widely used in different industries such as plastic, printing, paint, textile,dyeing,etc. It measures the sample color values of L*a*b*, L*c*h*, color difference ΔE and ΔLab according to CIE color space.


1. Introduction

Device sensor exports Japan and processing chip is from USA, which guarantee the optical signal transfer accuracy and electrical signal stability. Display accuracy reaches 0.01, repeated test accuracy △E deviation value is below 0.10.


2. Multiple color space display color values : L*a*b,L*c*h,Yxy

Being the most commonly used testing device, our colorimeter with built-in color display indicators transformation program, which makes our device could be used for color testing in many different industries. And it do not need convert the measurement data by manual which greatly improve the work efficiency.

instrument of measuring color


3. Ergonomic Design

Instrument designs according to human palm so we could test data for long time with it. Superior leather design increases the friction in case of fingers sliding.

instrument of measuring color


4. Free Color Management Software

Real-time display of pass or fail, generate testing report, save the color values, suitable for enterprise to evaluate color and management the color value.

instrument of measuring color


5. Establish L*a*b* by manually

The standard samples can be manually set to meet the color difference test if there is no sample in hand.


6. Large store memory

The device could store 100 standard sample groups and every sample group could store 100 sample data.


7. Average Measurement Values

Test different points on sample and get the average value. It is widely used for color control whose color is not uniform.


8.Technical Support

instrument of measuring color

a. One Year Guarantee Time.

Type

CS-10

Illumination system

8/d8°/diffused illumination

SCI

Testing Port Diameter

8mm

Measuring conditions

CIE 10° standard observer; CIE D65 light source

Display

Chromaticity Value: L*a*b,L*c*h,E*ab,XYZ,Yxy, Relative RGB,color difference E*ab,E*ch

Measuring range

L*:1-100

Repeatability

Standard deviation within E*ab*, below 0.1(testing condition: measure the white calibration board for average)

Storage

10 sets of standard samples; up to 100 under each standard sample

Measuring time

About 0.5 seconds

Measuring light source

LED

languages

Chinese, English

Power

Four AA1.5V Alkaline battery or nickel-metal hydride batterys; Exclusive DC5V adapter

port

USB2.0 printer

weight

550g

Size

77×86×210mm